Assemble parts to create an assembly. • Create a part drawing. • Create an assembly drawing. Pro/ENGINEER Wildfire Overview. This lesson will allow you. This Creo Parametric tutorial will demonstrate how to create an assembly drawing complete with a bill of materials and corresponding balloons. There are a few. Using Pro Engineer to produce exploded views of an object. HYBRID BIKES AND BICYCLES DESIGN.
|Author:||Brielle Dicki DDS|
|Published:||24 August 2017|
|PDF File Size:||34.65 Mb|
|ePub File Size:||6.19 Mb|
|Uploader:||Brielle Dicki DDS|
Once the individual drawings of each component were completed the assembly could begin.
Large Assembly Drawings
This task was accomplished by the disassembling the parts of the wheelchair and measuring the features. In drawing the components for the small wheel assembly this team was presented with interesting obstacles.
For instance, to draw the spokes a point to point sweep using pro e assembly drawings trajectory and feature copy was used. Also, the dimensions of the fork geometry included irregular angles and curves making the drawing complex.
Below is the original small wheel pro e assembly drawings. Charles Lowe and Ryan Morey This team was responsible for the large wheel assembly. This task entailed drawing the wheel, rim, tire, handgrip hoop, spokes, hub and bearings of the large wheel.
Pro Engineer Reference Parts in Drawing
There are two sets of spokes attached to the rim, one attached to each pro e assembly drawings of the pro e assembly drawings. Additionally, the set of spokes on each side is angled so that is does not connect from the hub to the rim in a direct line as a radius would.
Move views, which are complete to separate sheets of the drawing. The views can be moved back to the original sheet prior to plotting. Use Z-Clipping to reduce graphical information displayed in an assembly view.
All geometry behind the Z-Clipping plane will be removed from the display. Create views of the subassemblies instead of creating views of simplified representations of the master assembly.
The display of components in an assembly can be blanked in a drawing. Create layers to blank the display of many components in pro e assembly drawings assembly. After switching back to the drawing, all views of the current sheet are regenerated automatically.
PRO E - Assembly Mass Parameter - PTC: Creo Parametric (Pro/ENGINEER) - Eng-Tips
This could last up to 1 hour and more. So the user has control using Views - Pro e assembly drawings View to regenerate the view, which he currently needs to go ahead with his work Often the user is doing a change in the model and he needs only one view to be updated at the moment.
When changing display of a layer, the views are regenerated regardless of this option setting. PTC development is working on this problem.
pro e assembly drawings If it hurts pro e assembly drawings much, use these workarounds: Erase views before using layer Add an additional empty sheet to the drawing, switch to this sheet before using layer If you find a better solution, please inform me.
To speed up working in drawings you can suppress features in the part use wireframe display erase views in the drawing use simpl. Retrieval of drawingfile and all modelfiles, then the display of all views has to be regenerated.